> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://esabservice.crisp.help/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Calibration/Validation certificates for new units

# New products from ESAB are not supplied with certification to EN IEC 60974-14 


All welding products manufactured by ESAB conform to:

EN IEC 60974-1
EN 60974-10
UK S.I 2021/745

The manufacturing standard (60974-1) sets out the required accuracy for the meters used in equipment.

The calibration/validation standard (EN IEC 60974-14) recommends retesting with an interval of 12 months.

If it’s a requirement that you have Calibration/Validation (EN IEC 60974-14) certificates then this can be done by one of our ARC’s (Authorised Service Centre).

An EOL (End Of Line Test) certification from the factory is available for download here,
[Standard Equipment Certificates](https://esab.com/gb/eur_en/support/certifications-and-documents/standard-equipment-certificates/)

This is a certificate that the machine complies with the 60974-1, this is not a calibration according the 60974-14
**This only works for products manufactured in Opole, Poland**.

(You need an ART no. and the Serial Number for each unit).


![Standard equipment certificates](https://storage.crisp.chat/users/helpdesk/website/f2a09275bd2d8000/standard-equipment-certificate_oj1i9t.png)
 

This EOL certificate shows that the equipment equipment conforms the ESAB specifications of manufacture.  


This may be acceptable for your customer as it documents the conformance to the standards.